![]() This was all done to a 24 year old Poulan 2050. ![]() Disassembly and reassembly takes longer than the repair. That will hold the crank in place while you spin off the clutch. Chain tensioning is loosened so that the chain and guide bar can be removed immediately. Unscrew them by hand or with a wrench or Allen wrench. It is usually held in place by two bolts and secured by two nuts. The only way to keep the motor from turning while you try to loosen the clutch is remove spark plug, put about 8" to a foot of none fraying 1/4" rope down the plug hole and turn the clutch till the piston pushes its way onto the rope. Remove the cover on the side of the chainsaw where the guide bar is attached. Please note that the removal tool is necessary for the clutch which was cheap from you folks. Roughly an hour included refill of chain oil and cleaning the air cleaner. Just keep working it slowly with a flat blade screwdriver Make sure the spacing is as close to possible to the spacing out of the bag it comes in. Hardest part is putting the pump spring drive on the shaft. Removed clutch with new removal tool and help from the video.Removed and replaced oil pick up assy.
0 Comments
Leave a Reply. |